Use a carpet adhesive remover if your carpet is spotty or it just seems to be a bit dull. The carpet adhesive remover may not work on a spotless carpet, but it will work for scrapes. You don't want to hurt your carpet, though, so be careful. Carpet glue is used to bond new carpet to the old one, and sometimes it's difficult to remove with regular household cleaners. To help keep your carpet looking new and good as new, get the right adhesive for your carpet.
Laminate floors take quite a bit of abuse. Keep in mind that laminate flooring is not actually made from wood, so it's not "real" wood, which means you have to take extra precautions to make sure it stays looking good. Be sure to wear thick quality socks when brushing old carpet glue off the floor. If the carpet adhesive remover is too sticky, you must use an absorbent carpet adhesive remover first. One product, Adhesive Remover specifically for carpets, will soften up the glue enough for you to scrape it clean. If you are concerned about removing too much glue, use rubbing alcohol to wash the area, and then follow up with your carpet adhesive remover to remove any excess residue.
Cleaning concrete floors can be tricky. The concrete can be extremely hard to clean without damaging it. For surfaces like concrete, there are cleaning products out there that are designed for use on concrete floors. There are also products that are designed to be used on hardwood, ceramic tile, linoleum, and vinyl tile surfaces. Use these products on your concrete surfaces first to see if they will damage them before using the carpet adhesive remover on your hardwood or ceramic tile surfaces.
On the other hand, if you want to scrape some old adhesive off a carpet or rug, there are a few things you need to consider. First, there are products on the market today that is designed specifically for scraping up old glue stains. These products are called carpet stick-on stains removers. You can spray these on the stained area, let it stand in place for a few minutes, and then scrub it clean. You will need to be careful not to spray too much of the carpet glue remover onto the actual stain because this could ruin your carpet permanently.
If you are thinking about using carpet adhesive remover on an area where it's very sticky, like an old carpet pad, then you may have to get some additional supplies. First, you will need some kind of pressure-sensitive adhesives. Pressure-sensitive adhesives are sold in roll form and can be found at your local janitorial supply store. You may also be able to buy this same product online; however, you will have a much larger selection to choose from.
Before you begin using the carpet adhesive remover on your concrete floor surface, make sure you first apply a light coat of sealant to help protect the floor from possible stains and damage. This sealant should be applied to all edges and corners of your floor. You can spray the sealant directly on the concrete, or you can use it as a filler by applying it with a sponge. This second method allows you to spread the product evenly over the surface instead of having it form pools in certain areas.
Now that you have the right kind of product, it's time to scrub the floor. When you buy carpet adhesive removers, you will find that each can usually be purchased in a can container, which makes it very easy to store. Make sure you spray the product onto your cleaning rag or mop and then go over the surface with a toothbrush or sponge. Be sure to go over the entire surface and not just any part of the area. If you only go over the parts of the carpet where you want to make a change, the super remover adhesive removers may not work as well.